EDOO S70P-F Mini 2D Barcode Scan Engine Module, USB and TTL UART Interface for Kiosks, PDA and Handheld Terminals

Key Specifications

• Self-developed decoding algorithm on a dedicated decode chip for fast, stable 1D and 2D reading
• Imager and decoder board sealed as one unit: 21.5 x 7 x 10.5 mm and under 3 g, built for miniature equipment
• Reads paper labels, phone and monitor screens and DPM marks, in forward and reverse colour, down to 3.3 mil
• USB (HID keyboard or virtual serial port) and 3.3 V TTL UART on a 12-pin 0.5 mm FPC connector
• Real-time image capture, key or level trigger modes and in-application (IAP) firmware upgrade
• GS1 Application Identifier parsing, including medical-device UDI codes
• Image Sensor: 1280 x 800 CMOS, fast exposure
• Decode Resolution: 3.3 mil
• Field Angle: 39 degrees horizontal, 26 degrees vertical
• Interfaces: USB HID-KBW, USB virtual serial port, TTL-232 (3.3 V)
• Illumination / Aiming: White LED + cross-pattern 650 nm laser
• Size / Weight: 21.5 x 7 x 10.5 mm, under 3 g
• Power: DC 3.2 - 3.6 V, 280 mA scanning, 40 - 45 mA standby
• Warranty: 1-Year

Product Description

The S70P-F is a miniature 1D/2D barcode scan engine from EDOO. A dedicated decode chip running EDOO's own decoding algorithm drives a 1280 x 800 CMOS imager with fast exposure, and the imager and decoder board are integrated into a single 21.5 x 7 x 10.5 mm, sub-3 g module that fits inside equipment where a scanner cannot. It resolves codes down to 3.3 mil at a 10% print contrast, across a 39 degree horizontal by 26 degree vertical field, with roll 360 degrees and pitch and skew of +/-60 degrees, and it works in ambient light from 0 to 100,000 Lux.

It reads paper labels, phone and monitor screens and direct-part-marking (DPM) codes, in forward and reverse colour, across the common 1D and 2D symbologies - Code 128 / GS1-128, EAN, UPC, Code 39, Interleaved 2 of 5 and postal codes alongside QR, Micro QR, Data Matrix, PDF417, Aztec, Maxicode, Hanxin and GridMatrix - and it parses GS1 Application Identifiers, including medical-device UDI. Integration is over USB (HID-KBW or virtual serial port) or 3.3 V TTL-232 on a 12-pin 0.5 mm FPC connector, with dedicated Beep, LED and nTrig pins for buzzer, indicator and external trigger; key-trigger and level-trigger modes, real-time image capture and in-application firmware upgrade are all configurable by command. The S70P-F is used by equipment makers in self-service kiosks, express delivery cabinets and ticket verification terminals, and in handheld scanners, PDA, tablets, scan rings and handheld POS. Covered by a 1-year warranty and EDOO technical support, with ODM and OEM orders welcome.

21.5 x 7 x 10.5 mm  |  1280 x 800 imager  |  3.3 mil decode  |  USB + TTL UART

Online consultation Datasheet